| |
General Technology |
| |
|
| |
|
| |
-
MMEL 1232 - Instrumentation and Control Fundamentals
Instrumentation and Control Fundamentals introduces the student to: (a) the concepts and devices associated with the sensing, measuring, and control of the basic process parameters of flow, pressure, level, and temperature; (b) the use of test instruments and devices to calibrate process instrumentation; and (c) the actual construction of basic instrument control loops on process simulators in a laboratory environment. This course is a self-paced combination of internet study, CD-ROM, and text material accompanied with scheduled instructor laboratory time at the Regional Center for Advanced Manufacturing (RCAM) on the Kingsport site of Northeast State.
Credits: 2
Lecture Hours: 2
Lab Hours: 2
Contact Hours: 4
Prerequisites & Notes
Prerequisites: Dean’s approval.
Note: Course not designed for transfer.
Click here for Summer 2024 course scheduling information.
Click here for Fall 2024 course scheduling information.
Click here for course textbook information.
|
| |
-
MMEL 1241 - Mechanical and Electrical Control Systems
The Mechanical and Electrical Control Systems course concerns (a) electrical standards, (b) introduction to the design and understanding of electrical schematics, and (c) transformers and three-phase electrical fundamentals. This course is a self-paced combination of internet study, CD-ROM, and text material accompanied with scheduled instructor laboratory time at the Regional Center for Advanced Manufacturing (RCAM) on the Kingsport site of Northeast State.
Credits: 2
Lecture Hours: 2
Lab Hours: 3
Contact Hours: 5
Prerequisites & Notes
Prerequisite: Dean’s approval.
Note: Course not designed for transfer.
Click here for Summer 2024 course scheduling information.
Click here for Fall 2024 course scheduling information.
Click here for course textbook information.
|
| |
-
MMEL 1242 - Mechanical Print Reading and Precision
The Mechanical Print Reading and Precision Measurement course concerns the principles and procedures involved in reading and interpreting blueprints as well as to familiarize the student with precision measuring tools and their correct use. This course is a self-paced combination of internet study accompanied with scheduled instructor laboratory time at the Regional Center for Advanced Manufacturing (RCAM) on the Kingsport site of Northeast State.
Credits: 1
Lecture Hours: 1
Lab Hours: 1
Contact Hours: 2
Prerequisites & Notes
Prerequisites: Dean’s approval.
Note: Course not designed for transfer.
Click here for Summer 2024 course scheduling information.
Click here for Fall 2024 course scheduling information.
Click here for course textbook information.
|
| |
|
| |
-
MMEL 1252 - Instrumentation and Control
Instrumentation and Control is an in-depth study of piping and instrument drawings, interpretation of process control drawings, and in-depth study of the measurement and control of the following process parameters: pressure, liquid, fluid flow, temperature, and the application of control valves. This course is a self-paced internet study accompanied with scheduled instructor laboratory time at the Regional Center for Advanced Manufacturing (RCAM) on the Kingsport site of Northeast State.
Credits: 1
Lecture Hours: 1
Lab Hours: 3
Contact Hours: 5
Prerequisites & Notes
Prerequisites: Dean’s approval.
Note: Course not designed for transfer.
Click here for Summer 2024 course scheduling information.
Click here for Fall 2024 course scheduling information.
Click here for course textbook information.
|
| |
|
| |
|
| |
|
| |
-
MMEL 2211 - Welding Fundamentals
Welding Fundamentals introduces the student to a Virtual 360 welding machine, shielded metal arc welding (SMAW), gas tungsten arc welding (GTAW), and thermal cutting processes. This course is a self-paced study using text material accompanied with scheduled instructor laboratory time at the Regional Center for Advanced Manufacturing (RCAM) on the Kingsport site of Northeast State.
This training DOES NOT certify the student to weld on piping, vessels, or structural components.
Credits: 2
Lecture Hours: 2
Lab Hours: 2
Contact Hours: 4
Prerequisites & Notes
Prerequisites: Dean’s approval.
Note: Course not designed for transfer.
Click here for Summer 2024 course scheduling information.
Click here for Fall 2024 course scheduling information.
Click here for course textbook information.
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
Geography |
| |
|
| |
|
| |
|
| |
-
GEOG 1950 - ♦Introduction to GIS Technology
Introduction to Geography Information Systems (GIS) is a study of the basics of using computerized map information in science, education, social sciences, and business applications. Students will learn to organize their own projects using mapping software, spatial data, GPS technology, and other emerging technologies. (Because of the technical nature of the course, students must demonstrate adequate computer skills before enrolling).
Credits: 3
Prerequisites & Notes
Prerequisites: READ 0870, ENGL 0870, all required math learning support courses, or appropriate entrance scores.Note: This course is the same as CISP 1950 and CRMJ 1950.
Note: ♦ Course designed for transfer.
Click here for Summer 2024 course scheduling information.
Click here for Fall 2024 course scheduling information.
Click here for course textbook information.
|
| |
|
| |
|
Health |
| |
|
| |
|
| |
|
| |
-
HLTH 2100 - ♦Health Systems
Health Systems is a study of healthcare systems in the United States and other countries with an emphasis on management, financial and legal aspects of health-related services. Topics include organization of health services, public health, ambulatory health services, hospitals, mental health, pharmaceuticals and ethics.
Credits: 3
Lecture Hours: 3
Semester: Fall, Spring, Summer
Prerequisites & Notes
Prerequisites: ENGL 0870, READ 0870, all required math learning support courses.
Note: ♦ Course designed for transfer.
Click here for Summer 2024 course scheduling information.
Click here for Fall 2024 course scheduling information.
Click here for course textbook information.
|
| |
|
Health-Related Professions |
| |
|
History |
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
Horticulture |
| |
|
| |
-
HORT 1110 - ♦Landscape Plant Materials I
Landscape Plant Materials I is a study of identification, culture, characteristics and use of plants. Topics include nomenclature, identification, growth and cultural requirements, soil preferences, and landscape applications are emphsized. Students acquire knowledge in proper selection and utilization of plant materials.
Credits: 3
Lecture Hours: 3
Semester: Fall, Spring
Prerequisites & Notes
Prerequisites: All required math learning support courses, ENGL 0870, READ 0870, or appropriate entrance scores.
Note: ♦ Course designed for transfer.
Click here for Summer 2024 course scheduling information.
Click here for Fall 2024 course scheduling information.
Click here for course textbook information.
|
| |
-
HORT 1120 - ♦Landscape Design
Landscape Design is an introduction to principles and practices for residential sites. Topics include drafting, site analysis and common elements of good design, plant materials selections, proper plant utilization, and design implementation. Students learn to read, plan, draft, and implement a landscape design.
Credits: 3
Lecture Hours: 3
Semester: Spring
Prerequisites & Notes
Prerequisites: All required math learning support courses, ENGL 0870, READ 0870, or appropriate entrance scores.
Note: ♦ Course designed for transfer.
Click here for Summer 2024 course scheduling information.
Click here for Fall 2024 course scheduling information.
Click here for course textbook information.
|
| |
-
HORT 1150 - ♦Soils and Fertilizers
Soils and Fertilizers is a study of the physical and chemical properties of soils, soil fertility, and management. Topics include soil formation, classification, testing, fertilizer application, and other amendments. Students learn to analyze, evaluate, and properly amend soils and media for horticulture use.
Credits: 3
Lecture Hours: 3
Semester: Fall, Spring
Prerequisites & Notes
Prerequisites: All required math learning support courses, ENGL 0870, READ 0870, or appropriate entrance scores.
Note: ♦ Course designed for transfer.
Click here for Summer 2024 course scheduling information.
Click here for Fall 2024 course scheduling information.
Click here for course textbook information.
|
| |
-
HORT 1310 - ♦Horticultural Pesticides
Horticultural Pesticides is a study of the identification and control of plant pests including insects, diseases and weeds. Topics include pest identification and chemical regulation, pesticide application, and safety. Course work will satisfy re-certification point requirements and prepare students to take the Tennessee Commercial Pesticide Applications License test and the test for certification in Ornamental and Turf (C03).
Credits: 3
Lecture Hours: 3
Semester: Fall, Spring
Prerequisites & Notes
Prerequisites: All required math learning support courses, ENGL 0870, READ 0870, or appropriate entrance scores.
Note: ♦ Course designed for transfer.
Click here for Summer 2024 course scheduling information.
Click here for Fall 2024 course scheduling information.
Click here for course textbook information.
|
Humanities |
| |
|
| |
|
| |
|
| |
|
| |
|
Industrial Technology |
| |
-
INTC 1000 - Industrial Math
Industrial Math is designed to provide a review of general industrial mathematics including whole numbers, powers and roots, positive and negative numbers, fractions, decimals, percent, ratio and proportion, basic algebra, and an understanding of formulas, charts, graphs, and trends.
Credits: 1
Lecture Hours: 1
Prerequisites & Notes
Note: Course not designed for transfer.
Click here for Summer 2024 course scheduling information.
Click here for Fall 2024 course scheduling information.
Click here for course textbook information.
|
| |
|
| |
|
| |
|
| |
|
| |
-
INTC 1040 - Chemical Industry Process Lines
Chemical Industry Process Lines is an introduction to chemical industry process lines. Coverage includes: terms and symbols, principles of electricity and electrical equipment, heat exchange, piping, flanges, blanks, rupture disk, filters, strainers and screens, steam traps, valves, vents, pumps, condensers, vessels, silos, motors, switches, steam vacuum jets, conveyors, hydraulics systems, and boilers. Troubleshooting techniques are emphasized.
Credits: 4
Lecture Hours: 3
Lab Hours: 2
Prerequisites & Notes
Prerequisites: None.
Note: Course not designed for transfer.
Click here for Summer 2024 course scheduling information.
Click here for Fall 2024 course scheduling information.
Click here for course textbook information.
|
| |
|
| |
|
| |
-
INTC 1043 - Equipment III
Equipment III will introduce the various types of process equipment used in a chemical manufacturing facility. Students will cover the uses of the equipment as well as associated auxiliary equipment. Topics included are reactors, furnaces, heat exchangers, cooling towers, mixers, filters/centrifuges, cyclones/scrubbers, decanters/extractors, evaporators/crystallizers, dryers, and vents. Each topic will address equipment functionality, performance, and safety guidelines.
Credits: 2
Lecture Hours: 2
Prerequisites & Notes
Note: Course not designed for transfer.
Click here for Summer 2024 course scheduling information.
Click here for Fall 2024 course scheduling information.
Click here for course textbook information.
|
| |
|
| |
|
| |
-
INTC 1061 - Applied Physical Science
Applied Physical Science is a study of the basic laws and principles in the area of Physics, Thermodynamics, Electricity, and Fluid Dynamics. Knowledge in these topics is essential for understanding energy consumption, heat transfer, steam generation, electrical circuits, AC and DC motors, fluid flow, material balancing, and many other applications related to monitoring and troubleshooting the instruments and equipment in a chemical manufacturing process.
Credits: 1
Lecture Hours: 1
Prerequisites & Notes
Note: Course not designed for transfer.
Click here for Summer 2024 course scheduling information.
Click here for Fall 2024 course scheduling information.
Click here for course textbook information.
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
Machine Tool Technology |
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
Manufacturing Technology |
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
Mass Communications |
| |
|
| |
|
| |
|
| |
|
| |
-
COMM 2030 - ♦Audio Production
Audio Production introduces students to the fundamentals of multi-track audio production. Students will explore recording techniques, including the choice of microphones and their placement, as well as, editing and mixing multi-track audio utilizing equalization, compression, reverb, and panning. With an emphasis on acoustics and the physics of sound, class projects will focus on producing audio for distribution via radio, television, film, internet, and live performance.
Credits: 3
Lecture Hours: 3
Prerequisites & Notes
Prerequisites: ENGL 0870, READ 0870, or appropriate entrance scores.
Note: ♦ Course designed for transfer.
Course does not satisfy TBR/Northeast State’s General Education Core.
Click here for Summer 2024 course scheduling information.
Click here for Fall 2024 course scheduling information.
Click here for course textbook information.
|
| |
Page: 1
| 2
| 3
| 4
| 5
| 6
| 7
|
Print this Page
Connect with Northeast State